Please wait while the page loads...

How much does it cost to get the engine light checked?

The average rate for a check engine light diagnosis & testing is mostly between $88 and $111. The convenient news, Nalley Acura offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not appropriately tightened to a more clear failure like a harmful catalytic converter or a problem with one of the car's oxygen sensors, so it convenient to get the legal code reading and diagnosis.

What could cause the check engine light to come on in a 2013 Acura RDX?

When your check engine light comes on, this could be as different as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a serious problem that could cause serious damage to your engine and come with a generous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow regularly means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is needed immediately. If your check engine light is flashing in your 2013 Acura RDX, we exceedingly imply not to drive the vehicle and schedule Acura service today. Below is a list of the most different reasons your check engine light can come on:

  • The battery is low or dead. The battery in your 2013 Acura RDX is every decisive. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't actually require maintenance. The price of a new one depends on the type of Acura you commute, but check our present service coupons and specials.
  • One of the most easy and many cause is that your 2013 Acura RDX gas cap is loose, damaged or missing. The gas cap for your 2013 Acura RDX serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classical or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2013 Acura RDX, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Acura RDX is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to plain changes, like altitude. If your Acura RDX is having trouble starting, idling rough or has a fast change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less colossal when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Acura RDX's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the right assortment of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2013 Acura RDX has a vacuum leak. Every Acura RDX has a vacuum system that performs a cavernous variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to extraordinary heat or extreme fast.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your 2013 Acura RDX if it’s not installed properly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even prohibit the vehicle from starting. If these issues sound traditional, bring your RDX to Acura and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might estimate a small bit more but could save you money from having to get low work and damage caused by low installation work corrected.
  • New Spark Plugs or Plug Wires are needed for your 2013 Acura RDX. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classical, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Acura RDX’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Nalley Acura offers a complimentary multi-point inspection with every Acura service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Acura RDX will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.

2013 Acura RDX Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly lights up, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also acknowledged as the OBD (on-board computer diagnostic system) in your RDX. There are hundreds of distinctive codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling main diagnostics will give you advantageous knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, easy and cooperative vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Ignition system faults
  • Emissions controls issues
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • O2 Sensor
  • Fuel and air metering systems problems
  • Old Battery
  • Transmission issues

This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Nalley Acura at 7706299293 today or schedule your check engine light service online today! If the engine light comes on due to a treacherous concern, you risk detrimental your car different by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Acura mechanic.

Will the check engine light reset itself?

The check engine light on your 2013 Acura RDX will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Acura RDX light will go off after about 20-40 miles. If you drive over that sum and the light is still on, you will need to bring it in to Nalley Acura so the light and code can be double-checked and reset.

What Does the Check Engine Light Mean?

One of the most constantly misunderstood lights or indicators in your 2013 Acura RDX is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a assortment of things for your 2013 Acura RDX. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a variety of distinct things. It can be as plain as your gas cap being loose or as dangerous as engine knocking. If your check engine light is on in your 2013 Acura RDX, contact Nalley Acura. Our Acura service department can help you read what code is turning your check engine light on or diagnose why your check engine light is blinking. Contact Nalley Acura today!

2013 Acura RDX Check Engine Light

A flashing light illustrates that the problem is unhealthy and if not taken care of shortly may result in primary damage to the car. If the check engine light in your 2013 Acura RDX starts flashing, that means that the problem needs sudden attention and your Acura should be brought in shortly. This blinking light usually indicates a curious engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can abruptly raise the temperature of the catalytic converter to a point where damage is potential, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, classic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a particularly expensive repair. If your check engine light is twinkling, please contact our team of automotive experts at Nalley Acura immediately by calling 7706299293.

2013 Acura RDX Check Engine Light Flashing

Although there are many achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot noted causes including something as straightforward as a loose gas cap. Other noted reasons for a Check Engine Light are faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Acura Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Acura issue was serviced.

Every 2013 Acura RDX was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its important systems. The sensors are commonly detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Nalley Acura provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Excessively Qualified Service technical.

Is it safe to drive your 2013 Acura RDX with the check engine light on?

If the check engine light is flashing, this means that there is a applicable issue and it is recommended to service your Acura RDX immediately. This question is not remarkably pure because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to travel to work. This is consistently indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more applicable problem. Call the advisors at Nalley Acura by dialing 7706299293 so you can describe the issues. Or reduce your speed and bring your 2013 Acura to our certified mechanics as soon as functional.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Nalley Acura to help recommend if your vehicle is reliable to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly.

Check Engine Light Service 2013 Acura RDX

What do you do when you’re driving along in your Acura RDX and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Acura owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Acura RDX checked as soon as possible. Ignoring that warning could end up causing major break to expensive engine components.

When your 2013 Acura RDX's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t cogent, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic inspect tool that is used by our Acura auto repair mechanics at Nalley Acura. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional high-tech to designate the issue and repair it.