2014 Acura TL Alignment in Marietta, GA | Nalley Acura

$129–$199 is a common dealer range; Nalley Acura provides up-front pricing for alignments.

Alignment cost can vary with tire condition and whether suspension parts need replacement. At Nalley Acura in Marietta we inspect tie rods, ball joints and strut mounts before finalizing price so there are no surprise charges.

• Price range reflects a typical dealer four-wheel alignment.
• Pre-alignment suspension inspection is included to identify additional repairs.
• Ask about current offers on our service specials.

About 60 minutes is a typical service window for a four-wheel alignment on a 2014 Acura TL.

Time depends on whether suspension components need repair or adjustment first; a thorough inspection and before/after printout are part of the process. Nalley Acura schedules a realistic block so technicians complete measurements, adjustments to factory specs, and a road test.

• Alignment measurement and adjustment: ~45–60 minutes.
• Suspension or steering repairs add more time as needed.
• Road test and before/after printout included.

Generally every 2–3 years or about 30,000 miles, or sooner after suspension work or a major impact.

Local Georgia roads with potholes and seasonal repairs can accelerate misalignment, so check sooner if you hit a large pothole or curb. Nalley Acura recommends inspecting alignment during tire service or when you notice steering or tire symptoms.

• Routine check every 2–3 years or 30,000 miles.
• Immediately after suspension repairs, tire replacement, or major road impact.
• Include alignment check with regular tire rotations and inspections.

Common signs are uneven tire wear, vehicle pulling to one side, an off-center steering wheel, and vibration at highway speed.

If you notice any of these symptoms while driving around Marietta or after hitting potholes, bring the 2014 Acura TL in for a diagnostic alignment check. Early detection avoids accelerated tire wear and preserves handling consistency.

• Uneven or rapid tire wear on inner/outer edges.
• Car drifts or pulls to one side without steering input.
• Steering wheel is crooked when driving straight.

A four-wheel alignment includes suspension and tie-rod inspection, tire pressure check, caster/camber/toe measurement and adjustment to factory specifications plus a before-and-after printout.

Technicians use OEM-grade alignment equipment to measure front and rear angles and adjust to Acura factory targets for the 2014 Acura TL. After adjustments we road-test the vehicle to confirm steering response and provide a printed report of the settings.

• Full suspension and steering component inspection before alignment.
• Adjust caster, camber and toe to Acura factory specifications; before/after printout provided.
• Final road test and technician notes for your records.

If tie rods, ball joints, or strut mounts are worn or bent, the alignment may not hold and further repairs are required.

During a pre-alignment inspection at Nalley Acura in Marietta, technicians check those components and report any parts that must be replaced before a reliable alignment can be set. We document findings and explain repair needs and costs before proceeding.

• Inspection will reveal worn steering/suspension components that prevent proper alignment.
• Replacement parts are quoted before work begins.
• Alignment is performed after necessary repairs so settings stay within spec.

The 2014 Acura TL pairs a 305-hp V6 with all-wheel drive and precise steering; keeping its geometry aligned preserves handling and tire life. Drivers from Roswell, Alpharetta, Milton, Johns Creek and Sandy Springs bring their cars to Nalley Acura for alignment because regional potholes and road repairs in North Atlanta can shift toe and camber over time. Our technicians verify steering components, set caster/camber/toe to factory targets, and confirm results with a road test. For convenient scheduling, schedule service online or review current service specials.

Service for the 2014 Acura TL follows a step-by-step process to restore factory geometry. We start with a full inspection of steering and suspension components (tie rods, ball joints, strut mounts) and check tire condition and pressure. Technicians then use OEM-alignment equipment to measure caster, camber and toe for front and rear positions and make adjustments to Acura factory specifications. After adjustments we perform a road test and provide a printed before-and-after alignment report so you can see the changes.

Items included: suspension and tie-rod inspection; tire pressure verification; caster/camber/toe measurement and adjustment to factory spec; before/after printout; road test. To book an appointment, schedule service.

Factory alignment work on the 2014 Acura TL targets caster, camber and toe values specified by Acura for front and rear axles. Our technicians use OEM-grade alignment racks and digital measurement tools to match those targets precisely. Common issues on this model that affect alignment include worn tie rods and impacts from potholes; detecting and correcting those issues is part of the alignment process.

Bring your 2014 Acura TL to Nalley Acura in Marietta for a factory-spec alignment — schedule service.